Connexion
C1500 Platinum ATX 3.1
Alimentation ATX 3.1 1500 watts 80 PLUS Platinum entièrement modulaire
Choisir les options
Aperçu
Le bloc d'alimentation NZXT C1500 Platinum offre une puissance très efficace et contrôlée numériquement, une conformité aux normes ATX 3.1 et une connectivité PCIe 5.1 avec un ventilateur à lévitation magnétique haute performance.
- Conçu en conformité avec les normes ATX 3.1 et PCIe 5.1 pour alimenter les générations actuelles et futures de processeurs et de cartes graphiques haute performance.
- Comprend deux câbles PCIe 5.1 à 16 broches 12 V-2x6, chacun capable de fournir plus de 600 W aux cartes graphiques à forte consommation d'énergie.
- L'alimentation numérique permet une régulation précise de la tension, ce qui se traduit par une efficacité accrue et un bruit d'ondulation réduit.
- Dépassant les normes 80 Plus Platinum, l'efficacité de 94 % réduit la consommation d'énergie pour des factures mensuelles moins élevées et un fonctionnement plus froid et plus silencieux.
- Certifié pour une efficacité ultra élevée et un niveau de bruit ultra faible avec les niveaux d'efficacité Cybenetics Titanium et de bruit Cybenetics A-.
- Construit avec des condensateurs japonais 105 °C de haute qualité pour une excellente fiabilité et des performances durables.
- La conception entièrement modulaire simplifie la gestion des câbles, permettant de ne connecter que les câbles nécessaires.
- Le format compact de 180 mm optimise l'espace précieux du boîtier tout en favorisant un meilleur airflow.
Une alimentation prête pour l'avenir
Deux connecteurs PCIe 5.1
Alimentation numérique
Exceptional Efficiency
Magnetic Levitation Fan
Une qualité de fabrication
Modularité intégrale
Format peu encombrant
Tranquillité d’esprit
- PPinesVerified ReviewerRated 1 out of 5 stars1 month agoDo not purchase this PSU if you have SATA HDDs or need SATA power
The pinouts for 3.3V and 12V are swapped. How is this possible, and not being advertised as a known issue???
This is absolutely inexcusable for a PSU at this price range.
NNZXT1 month agoHi Tom,
Thank you for bringing this to our attention. We sincerely apologize for the frustration caused by the pinout issue with your PSU.
We’ve seen your support ticket and are looking forward to sending you a replacement as soon as possible. If you have any further questions or need immediate assistance, please don’t hesitate to reach out.
Thank you for your patience.
Best regards,
NZXT Support - GGVerified ReviewerRated 2 out of 5 stars3 months agoNo SATA Power
I came here looking for a troubleshooting guide for the SATA power not working and saw someone else reporting the same problem. I've tried two of the included SATA cables on all four ports, but neither of my HDD drives spin up. Right now, I'm using a spare PSU to power the HDD drives instead. I got the NZXT C1200 previously and it didn't have any issues, at least. I'll try the third included SATA cable after lunch; if that one works, I'll come back to add a star haha. Minus 1-star per failed cable; giving benefit of the doubt that it's not the ports, or that'll be 4 stars down.
NNZXT1 month agoHi there,
Thank you for the detailed feedback. We're sorry to hear you're running into SATA power issues with your C1200. That's definitely not the experience we want you to have, especially coming from a positive experience with a previous NZXT PSU.
We weren't able to find an existing support ticket from you, so we'd love to get one started to properly troubleshoot this with you. Our team can help determine whether the issue is with the cables or the unit itself, and make sure you're taken care of either way. Please reach out to us at https://support.nzxt.com/hc/en-us/requests/new so we can dig into this together.
Hope the third cable does the trick after lunch, but either way, we've got you covered!
Best regards,
NZXT Support - SSteveVerified ReviewerRated 1 out of 5 stars3 months agoGreat as long as you do not need a SATA drive
Purchased these for a PC build and they work fine as long as you do not need to use a SATA drive. The cables are not able to power a rotating media HD and fans that are plugged into them take a long time to get up to speed. Rest of the connections work fine. To replace the cables need to send the entire power supply back and they send you a new one. Not very helpful. Would not purchase again
- SSnowmanVerified ReviewerRated 5 out of 5 stars6 months agoCybenetics Titanium. That says it all.
The quality on display with this unit is absolutely incredible. This is by far the best PSU I've ever owned. It's silently powering a delidded 9950X3D, an RTX 5090 Gaming OC, 16TB of 9100 Pro nvme storage, 10 Corsair QX120 fans on a Link hub and a XD6 pump/res combo. It has no issue powering this build silently, which is mind-blowing.
10-year warranty, full Japanese capacitors, Cybenetics Titanium rating, 2 x 12vhpr outputs and all the protections of a top-end PSU. Absolutely killer specs sheet and it performs as it should in the field.
The only flaw is the cable set. For this price, I expect individually sleeved cables with a beautiful finish. The cables feel like an afterthought which is a crying shame considering the rest of the unit is near flawless. At a minimum, if the power supply came with a coupon for 50% OFF custom cables from a third party OR an option to purchase sleeved cables from NZXT themselves, that would be acceptable. A premium price tag for mid-tier cables is a slap in the face of your most discerning customers.
- MMafuRated 5 out of 5 stars11 months agoAmazing Premium PSU. Temporary review - haven’t assembled yet.
Just as the title states, I haven’t assembled the PC yet as I’m still waiting for parts and components for a full watercooled PC. So I may come back and edit the review regarding the outcome and the PSU. All I can say so far that this PSU screams premium at a very cheap price (got it for 280 euros. That’s insane for a 1500w PSU) for what you get. You get high hold up time due to the high capacity of wattage, you get atx 3.1 and pcie 5.1 standards, you get a psu that it’s not so lengthy like some other brands (210mm) giving you more space for the cable management in the back, you get zero fan mode, protections, efficiency and what not. The only thing I don’t like is the fact that the cables are not braided/ individually sleeved. I would’ve paid more no problem. I have instead to order from cablemod, the cables (and the 12v-2x6 from Moddiy due to the leaf spring pin design) in order to have more flexible cables and also customised. But it’s fine anyway because I doubt I would’ve used the cables from a PSU, which even if they would’ve been braided/ individually sleeved, they’d still be just one color and not customised, no fancy 90 degrees or even 180 degrees adapter, etc.
The packaging: Oh I love it (I attached a picture), it screams premium. I love the foam, the box, the separation cardboard, the square protective satchel for the PSU, the little bag with velcro that has the cables in it. It’s awesome. The plastic bag that the cables are in it’s garbanzo tho.
All in all so…